High pressed graphite stem packing between double glands
• Double nut locking with disc springs
• Non-contamination execution
• Heavy industrial stopper plate with locking device
• Centring point on top of stem
• Galvanised steel or stainless steel lever
• Double D oversized stem
• Triple stem packing
• Low friction fi nishing stem
• Double nut locking with disc springs
• Non-contamination execution
• Heavy industrial stopper plate with locking device
• Centring point on top of stem
• Galvanised steel or stainless steel lever
• Double D oversized stem
• Triple stem packing
• Low friction fi nishing stem
Body seats : primary PTFE seat, secondary graphite seat
• Separate chambered body seals
• Complete inside machined body and minimum dead spaces
• Double sealed body & stem
• Machined integral full bore
• Solid internal machined ball
• Chambered cavity relieve ball seats
• Fire safe metal/metal ball seats
• Maximum overlapping ball seats
• Separate chambered body seals
• Complete inside machined body and minimum dead spaces
• Double sealed body & stem
• Machined integral full bore
• Solid internal machined ball
• Chambered cavity relieve ball seats
• Fire safe metal/metal ball seats
• Maximum overlapping ball seats
Stem seats : primary PTFE seat, secondary graphite seat
• Double antistatic execution (ATEX certifi ed)
• Anti blow-out stem (TA-luft certifi ed)
• ISO-mounting fl ange - DIN 3337
• Complete machined ISO-top and fl anges
• PTFE stem packing with double O-rings
• Pressure relieve hole in sleeve
• Separate PTFE trust
• Double cavity relieve seats
• Double antistatic execution (ATEX certifi ed)
• Anti blow-out stem (TA-luft certifi ed)
• ISO-mounting fl ange - DIN 3337
• Complete machined ISO-top and fl anges
• PTFE stem packing with double O-rings
• Pressure relieve hole in sleeve
• Separate PTFE trust
• Double cavity relieve seats
DESIGN TO
ANSI B16.5, ANSI B16.10, API 607, API 6FA, API 6D
BS 5351, BS 5159, BS 5146, BS 6755/2
DIN 2505, DIN 3202, DIN 3840, DIN 2501, DIN 7121, DIN 3337, DIN 2526, DIN 3357
ISO 5208, ISO 5211, ISO 7121, ISO 5752, ISO 10497, ISO 7268, ISO 2081, ISO 4520, ISO 9227
EN 12516, EN 1759, EN 1983, EN 13828, EN 19, EN 12351, EN 558, EN 10204 (DIN 50.049-3.1B), EN 1092, EN 736, EN 12570,
EN 1503, EN 6708, EN 1775
ANSI B16.5, ANSI B16.10, API 607, API 6FA, API 6D
BS 5351, BS 5159, BS 5146, BS 6755/2
DIN 2505, DIN 3202, DIN 3840, DIN 2501, DIN 7121, DIN 3337, DIN 2526, DIN 3357
ISO 5208, ISO 5211, ISO 7121, ISO 5752, ISO 10497, ISO 7268, ISO 2081, ISO 4520, ISO 9227
EN 12516, EN 1759, EN 1983, EN 13828, EN 19, EN 12351, EN 558, EN 10204 (DIN 50.049-3.1B), EN 1092, EN 736, EN 12570,
EN 1503, EN 6708, EN 1775
PED 97/23/EC (TÜV Süd Industrie Service - CE0036)
Pressure Equipment Directive
According to Module H (full quality assurance)
Pressure Equipment Directive
According to Module H (full quality assurance)
TA Luft approved (TÜV Süddeutschland)
Technische Anleitung zur Reinhaltung der Luft
According to TA luft (27.02.86) punkt 3.1.8.4
Technische Anleitung zur Reinhaltung der Luft
According to TA luft (27.02.86) punkt 3.1.8.4
ADR approved (Apragaz)
International Carriage of Dangerous Goods by Road
According to KB 09.03.2003 , Class 3, 4, 5, 6, 8 and 9
International Carriage of Dangerous Goods by Road
According to KB 09.03.2003 , Class 3, 4, 5, 6, 8 and 9
Fire Safe approved (TÜV Süddeutschland)
According to BS 6755/2 - API 6FA - ISO 10497
According to BS 6755/2 - API 6FA - ISO 10497
GAS approved (KVBG/ARGB)
Resistance to high temperature (RHT)
According to EN 1775
Resistance to high temperature (RHT)
According to EN 1775
ATEX approved (TÜV Süd Product Service)
Equipment for use in potentially explosive
atmospheres
According to Council Directive 94/9/EC,
article 8(1)b)ii)
Non-electric devices and components group II
Equipment for use in potentially explosive
atmospheres
According to Council Directive 94/9/EC,
article 8(1)b)ii)
Non-electric devices and components group II
• Three-piece body ball valve
• Full bore
• End connections according to BSP, NPT, BW or SW
• Face to face dimensions according to our production standard
Note : Also available with locking device, integral seats,
antistatic device, special version for steam applications.
• Full bore
• End connections according to BSP, NPT, BW or SW
• Face to face dimensions according to our production standard
Note : Also available with locking device, integral seats,
antistatic device, special version for steam applications.
• Three-way ball valve, L or T-bore
• Reduced bore
• End connections according to BSP or NPT
• Face to face dimensions according to our production standard
Note : Also available with direct mounting pad.
• Reduced bore
• End connections according to BSP or NPT
• Face to face dimensions according to our production standard
Note : Also available with direct mounting pad.
• One-piece body ball valve
• Reduced or full bore
• Flange connections according to DIN 2501 / DIN 2526 – PN 10/16, ANSI B 16.5
• Face to face dimensions according toDIN 3202-F18 (F4/F5), EN 558-1-14/15,ANSI B 16.10 – A-150
Note : Also available with DVGW approval for gas, ball in
stainless steel with antistatic device, ATEX certified.
• Reduced or full bore
• Flange connections according to DIN 2501 / DIN 2526 – PN 10/16, ANSI B 16.5
• Face to face dimensions according toDIN 3202-F18 (F4/F5), EN 558-1-14/15,ANSI B 16.10 – A-150
Note : Also available with DVGW approval for gas, ball in
stainless steel with antistatic device, ATEX certified.
• Wafer one-piece body ball valve
• Reduced or full bore
• Flange connections according to DIN 2501 / DIN 2526 – PN 10/16, ANSI B 16.5
• Face to face dimensions according to our production standard
Note : Small face to face dimension, compact ball valve.
• Reduced or full bore
• Flange connections according to DIN 2501 / DIN 2526 – PN 10/16, ANSI B 16.5
• Face to face dimensions according to our production standard
Note : Small face to face dimension, compact ball valve.
MANUAL
PNEUMATIC
ELECTRIC
HYDRAULIC
• One-piece body ball valve
• Reduced bore
• End connections according to BSP or NPT
• Face to face dimensions according to our production standard
• Reduced bore
• End connections according to BSP or NPT
• Face to face dimensions according to our production standard
• Two-piece body ball valve
• Full bore
• End connections according to BSP or NPT
• Face to face dimensions according to our production standard
Note : Also available with locking device,
direct mounting pad, polished version, fire safe and antistatic device.
• Full bore
• End connections according to BSP or NPT
• Face to face dimensions according to our production standard
Note : Also available with locking device,
direct mounting pad, polished version, fire safe and antistatic device.
